• Thread options Metric, NPTF, BSPT, BSPP, UNF.
• Models for 400 and 600 bar system pressures.
• Passivated steel construction.

Metric Soft Seat Test Point Plugs
Similar to the basic plugs, but for air, gas or liquid systems where bubble-tight sealing is essential.

• 1/4” BSPF male connection.
• 400 bar maximum working pressure.

Bulkhead Mounting Metric Test Point Plugs
Designed for use with HSP 1/4” or 1/2” BSPP Pressure Probes.

• Rear male thread for hose fittings.
• 400 bar maximum working pressure.

Metric Direct Pressure Probes
For direct connection to Test Point Plugs. They may be supplied with or without a gauge (gauge availability is described later).

• 400 bar and 600 bar versions available.
• 3 gauge sizes, 7 pressure ranges.

Metric Gauge to Probe Adaptors
For connecting 1/4” and 1/2” BSPP pressure gauges to Metric Hose/Probe assemblies.

• 400 bar and 600 bar versions available.
• Supplied with or without pressure gauge.

Metric Remote Hose/Probes
Forms a link between metric Test Point Plugs and pressure gauge/adaptor assemblies.

• For system pressures up to 400 and 600 bar.
• Wide choice of hose lengths.

Metric Hydra-Test System Kit
Complete kits of all the metric parts necessary to achieve system pressure testing by the Hydra-Test method. Kits include various test point plugs, direct and remote probes, pressure gauge or gauges with ranges to choice, ‘O’-rings and seals; all in a fitted carrying case. 3 kits are available with either a 63 or 100 mm gauge or 2 x 63 mm gauges.

• Gauge range selection from nine alternative ranges.
• 400 bar maximum working pressure.
• Test plugs can be installed in the system as permanent features.
• Pressure readings may be taken direct or remote.